Rice polishing machine MPG V-50M

●Comprehensive features

It is safe to use, easy to operate, low noise, easy to install and takes up little space.

●High-pressure air sprays water

The water of the polishing machine is forced into the polishing chamber in the form of mist under the action of high pressure, so that the water on the surface of the rice grains is even and stable. By controlling and adjusting the pressurized humid air, the surface damage or unevenness of the white rice during the polishing process is improved and solved. Ensure that the surface of all rice grains is smooth and clean.

●Water inlet automatic control device

In order to avoid stuffing the machine due to excessive water and materials when starting up, this machine is equipped with an automatic water inlet control device. When there is a shortage of material or too much material is fed, the water pump will automatically shut down. When the amount of material reaches a certain flow rate, the water pump automatically opens.

●Reasonable air suction system

The host runs under full negative pressure. During polishing, a large amount of air enters the polishing roller, causing the rice grains to float and loosen in the whitening chamber. At the same time, the bran powder produced by polishing and a large amount of hot and humid air are sucked out of the polishing machine, reducing the humidity and temperature of the rice, making the surface of the rice smooth and clean, and extending the storage time. .

●High-strength wear-resistant mirror roller

The polishing roller, bushing, propeller, and screen are all made of wear-resistant materials, which can extend the service life. After polishing, the surface of the rice grains is smooth and feels delicate.